0151 324 0072

Impossible Project PX680 for Polaroid 600 cameras

Impossible ProjectFilms for Polaroid Cameras
In Stock
RRP: £22.00 £17.50 Qty:

Secure Ordering


  PX 680 Color Shade Film First Flush

The First Flush Edition of the PX 680 Color Shade film fills the gap left by the legendary, by now hard to find Polaroid 600 film and introduces a magical new color palette within the classic white frame.

To really get the best out of this material you have to be aware that PX 680 Color Shade FF images are sensitive to light during their first seconds outside off the camera. Shield the images from light immediately after their ejection from the camera and during the first four minutes of development to get stunningly colorful images.

One pack of PX 680 Color Shade First Flush Edition delivers 8 uniquely colorful images and works in all Polaroid 600 cameras, as well as all SX 70 cameras equipped with an ND filter.

  GET STARTED

  1. Choose the right camera for the right Film

    PX 680 Color Shade First Flush has 600 ASA and works in all Polaroid 600 camera models as well as in SX 70 cameras equipped with a neutral density (ND) filter.
    PX 70 Color Shade has 100 ASA and is optimized for usage in Polaroid SX 70 cameras.
  2. Adjust the lighten/darken wheel
    When using a Polaroid SX 70 camera set the lighten/darken wheel to the middle position.
    For PX 70 PUSH! you will obtain the most colorful images when setting the lighten/darken wheel of your camera to the lighter area. Illuminating your object very well and using the film in warm surroundings will also reward you with very colorful photos.
  3. Hold camera stable, especially at low light levels
  4. Press the shutter
  5. Shield the Picture from light
    As the camera ejects the picture, do IMMEDIATELY shield it from light (e.g. with your hand, a darkslide, shoot into a box, etc...) - the first half second is crucial!
    Let the image then develop upside down/shielded from light for up to 4 minutes.
  6. Take a deep breath, turn the picture over and enjoy your Color Shade shot
  7. Initial spots or other anomalies in the picture will disappear after 24 hours - please allow the color pictures to take their time to exhibit the best results. The quality of the image will change even days after the moment was captured.
  8. Store your Color Shade pictures in a dry place.

Product Specifications

  • Film Speed: ISO 600/DIN 29
  • Type: Colour Integral Instant Film.
  • Format: 3.5 x 4.2 in. (8.8 x 10.7 cm), Image Area: 3.1 x 3.1 in. (7.9 x 7.9 cm)
  • Finish: Glossy
  • Development: 10 minutes approximately at 70°F (21°C)
  • Battery: Built in, long lasting battery to power up the camera and flash

 

 

 

Please note this is an experimental film, if you are not happy with your results, please check the Impossible Project website for ideas to improve the results at the following web address.  Just click on "colour shade" then "FAQ" for troubleshooting tips.

www.the-impossible-project.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 



There are no items related to this one!