PX 600 Silver Shade First Flush Instant Film for Polaroid 600 Cameras- NEW PRODUCT SPECIAL OFFER!!!
PX 600 Silver Shade First Flush
The new Impossible Instant Film
PX 600 Silver Shade, a completely new Integral Film from the Impossible Project,
customized for all classic Polaroid 600 cameras. Presented in the First Flush
Edition, this is the very first chance to taste the new experimental flavor of Instant
Photography by Impossible.
The First Flush Edition is targeted towards more experienced analog photographers
and is highly manipulable, featuring a suprising potential of characteristics, tones,
moods and astonishing results, which already fascinated our Impossible Testusers.
Now this material is ready for the public, carefully explained and supported by
a detailed online user manual and manipulation guideline (www.the-impossibleproject.
com/px) for creating the most outstanding instant pictures in history.
PX 600 Silver Shade film is a medium contrast high definition Integral Film,
carefully adjusted for optimized results when used with 600 cameras.
It renders a beautiful black&white characteristic with a lot of details, especially in
the darker areas, combined with a highly sensitive overall exposure performance
and sensitivity to processing temperature.
PX 600 Silver Shade is balanced for daylight and flash bar exposure.
PLEASE READ USER MANUAL BELOW BEFORE USE/PURCHASE:-
GET STARTED
Choose the right film for your camera
PX 100 Silver Shade + Polaroid SX70 Camera
The PX 100 Silver Shade has 100 ASA (film speed) and is optimized for usage in SX70 cameras.
With appropriate adjustment of the exposure settings it is also compatible for usage in all 600 series cameras.
PX 600 Silver Shade + Polaroid 600 Camera
The PX 600 Silver Shade has 600 ASA (film speed) and is optimized for usage in 600 cameras and SX70 cameras equipped with a ND filter.
INSTRUCTIONS
8 Quick Steps for optimal results
1. Choose the right film and put it into your camera
2. For your first photos shoot at 17-24°C / 63-75°F as the PX film is very sensitive to temperature
3. Set the camera's lighten/darken wheel to middle setting
4. Hold camera stable, especially at low light levels
5. Make the first magic shot
6. Shield picture from light immediately (cover with your hand)
7. Develop the picture upside down for ca. 2 minutes
8. Take a deep breath, turn the picture over and inhale your very first PX Silver Shade shot
DETAILED INSTRUCTIONS
Shield from Light
The emulsion of the PX Silver Shade First Flush Edition films is not 100% light-proof
immediately after exposure, therefore it is recommended to shield the developing picture
from bright light sources.
When the analogue picture exits your camera after its exposure, do immediately shield the
picture from light by
- putting it into a pocket or box pocket or box
- putting the face of the picture upside down
- shielding it with the darkslide
Develop for 2 minutes.
Careful with temperature
The chemistry of the PX Silver Shade First Flush Edition films is very sensitive
to temperature.
For most balanced results it is recommended to provide a medium room
temperature of 17-24°C (63-75°F)
- In extreme cold (10°C and below), the image will become very light,
quickly resulting in almost white tones, erasing most contrast. Use
with caution.
- In extreme heat (27°C and above), the image will turn very dark and
change to reddish, orange, and yellowish shades of extreme contrast
TIP:
When shooting in extreme temperatures, you can put the image in your pocket to warm it when out in the cold and keep it in the shade or via dark plasticbag in cool water to avoid too much heat when in hot surroundings.
Set camera's lighten/darken wheel to middle setting
The PX Silver Shade First Flush Edition films are very sensitive to
adjustments of the camera's lighten/darken wheel.
Do always put it to the middle setting for most balanced and optimized
results.
- Changing the wheel's position into the lighter area will result in
overexposed pictures.
- Changing the wheel's position into the daker area will result in
underexposed pictures.
Don't hesitate to manipulate
The PX Silver Shade film materials are manipulable just like original Polaroid SX70 film. You can perform the traditional manipulation technique, image transfers as well as emulsion lifts with it.
SPECIFICATION
PX 600 SILVER SHADE
FIRST FLUSH EDITION
Monochrome Instant Integral Film
Optimized for Polaroid 600 Cameras
Film Speed: ISO / ASA 600 / DIN 28
Format: 3,5 x 4,25 in. (8,9 x 10,8 cm)
Image Area: 3,031 x 3,125 in. (7,7 x 7,9 cm)
Finish: Glossy
Exposures per Unit: 8 exposures per pack
Development Time: 2 minutes approximately
Specials: Original Cartridge to fit traditional
Polaroid
Camera, Special B&W – Sepia Chemistry
Compatible Hardware: All Polaroid 600 Cameras
Also compatible for the usage in all SX70 series
cameras, but only with appropriate adjustment of the
exposure settings (ND Filter)
