Impossible Project PX100 Silver Shade Film for Polaroid Camera
PX 100 Silver Shade
The new Impossible Instant Film
PX 100 Silver Shade, a completely new Integral Film,
optimized for all classic Polaroid SX70 cameras. Presented in the First Flush
Edition, this is the very first chance to taste the new experimental flavor of Instant
Photography by Impossible.
The First Flush Edition is targeted towards more experienced analog photographers
and is highly manipulable, featuring a suprising potential of characteristics, tones,
moods and astonishing results, which already fascinated our Impossible Testusers.
Now this material is ready for the public, carefully explained and supported by
a detailed online user manual and manipulation guideline for creating outstanding instant pictures.
PX 100 Silver Shade film is a medium contrast high definition Integral Film, carefully
adjusted for optimized results when used with SX70 cameras.
It renders an astonishing pastel Sepia tone, combined with a highly sensitive overall
exposure performance and sensitivity to processing temperature.
PX 100 Silver Shade is balanced for daylight and flash bar exposure.
PLEASE READ USER MANUAL BELOW BEFORE USE/PURCHASE:-
GET STARTED
Choose the right film for your camera
PX 100 Silver Shade + Polaroid SX70 Camera
The PX 100 Silver Shade has 100 ASA (film speed) and is optimized for usage in SX70 cameras.
With appropriate adjustment of the exposure settings it is also compatible for usage in all 600 series cameras.
PX 600 Silver Shade + Polaroid 600 Camera
The PX 600 Silver Shade has 600 ASA (film speed) and is optimized for usage in 600 cameras and SX70 cameras equipped with a ND filter.
INSTRUCTIONS
8 Quick Steps for optimal results
1. Choose the right film and put it into your camera
2. For your first photos shoot at 17-24°C / 63-75°F as the PX film is very sensitive to temperature
3. Set the camera's lighten/darken wheel to middle setting
4. Hold camera stable, especially at low light levels
5. Make the first magic shot
6. Shield picture from light immediately (cover with your hand)
7. Develop the picture upside down for ca. 2 minutes
8. Take a deep breath, turn the picture over and inhale your very first PX Silver Shade shot
DETAILED INSTRUCTIONS
Shield from Light
The emulsion of the PX Silver Shade First Flush Edition films is not 100% light-proof
immediately after exposure, therefore it is recommended to shield the developing picture
from bright light sources.
When the analogue picture exits your camera after its exposure, do immediately shield the
picture from light by
- putting it into a pocket or box pocket or box
- putting the face of the picture upside down
- shielding it with the darkslide
Develop for 2 minutes.
Careful with temperature
The chemistry of the PX Silver Shade First Flush Edition films is very sensitive
to temperature.
For most balanced results it is recommended to provide a medium room
temperature of 17-24°C (63-75°F)
- In extreme cold (10°C and below), the image will become very light,
quickly resulting in almost white tones, erasing most contrast. Use
with caution.
- In extreme heat (27°C and above), the image will turn very dark and
change to reddish, orange, and yellowish shades of extreme contrast
TIP:
When shooting in extreme temperatures, you can put the image in your pocket to warm it when out in the cold and keep it in the shade or via dark plasticbag in cool water to avoid too much heat when in hot surroundings.
Set camera's lighten/darken wheel to middle setting
The PX Silver Shade First Flush Edition films are very sensitive to
adjustments of the camera's lighten/darken wheel.
Do always put it to the middle setting for most balanced and optimized
results.
- Changing the wheel's position into the lighter area will result in
overexposed pictures.
- Changing the wheel's position into the daker area will result in
underexposed pictures.
Don't hesitate to manipulate
The PX Silver Shade film materials are manipulable just like original Polaroid SX70 film. You can perform the traditional manipulation technique, image transfers as well as emulsion lifts with it.
Specification
PX 100 SILVER SHADE
FIRST FLUSH EDITION
Monochrome Instant Integral Film
Optimized for Polaroid SX70 Cameras
Film Speed: ISO / ASA 150 / DIN 23
Format: 3,5 x 4,25 in. (8,9 x 10,8 cm)
Image Area: 3,031 x 3,125 in. (7,7 x 7,9 cm)
Finish: Glossy
Exposures per Unit: 8 exposures per pack
Development Time: 2 minutes 30 seconds
approximately
Specials: Original SX70 Cartridge, Special B&W –
Sepia Chemistry
Compatible Hardware: All SX70 series cameras
including;
SX70 original
SX70 OneStep Autofocus
Time Zero Onestep
The Button
Polaroid 1000
Polaroid 2000
Also compatible for usage in all 600 series cameras,
but only with appropriate adjustment of the exposure
settings
Please note this is an experimental film, if you are not happy with your results, please check the Impossible Project website for ideas to improve the results at the following web address. Just click on "silver shade" then "FAQ" for troubleshooting tips.
